Date/Time Menu - Lenovo ThinkPad X131e User Manual

Table 4. Config menu items (continued)
Menu item
Beep and Alarm
Serial ATA (SATA)
CPU

Date/Time menu

If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup
program main menu. The following submenu is displayed:
• System Date
• System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change the date or time.
2. Press Tab, Shift+Tab, or Enter to select a field.
3. Type the date or time.
Notes: Another way to adjust the date and time is pressing the following keys:
• F5 or –: Change to a lower value.
94
User Guide
Submenu item
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Core Multi-Processing
®
Intel Hyper-Threading
Technology
Selection
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
• Disabled
• Enabled
• Disabled
• Enabled
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
Comments
Enables or disables the
password beep when the
system is prompting for
the power-on, hard disk, or
supervisor password to be
typed.
Enables or disables the
keyboard beep when
unmanageable key
combinations are pressed.
Selects SATA controller
operation mode. If you
select Compatibility , the
SATA controller operates in
compatibility mode.
Enables or disables
additional execution core
units within a CPU.
Note: If you are using a
computer with a single-core
processor, this item is not
available.
Enables or disables
additional logical
processors within a
processor core.
Note: This sub-menu is not
available in models with an
AMD CPU.