Date And Time Menu; Security Menu - Lenovo ThinkPad X1 Carbon User Manual

Table 6. Config menu items (continued)
Menu item Submenu item
CIRA Timeout
Console Type

Date and Time menu

To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu.
Then do the following:
1. Use the cursor keys to select System Dtae or System Time.
2. Type a date or time.

Security menu

To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu.
The following table lists the Security menu items. Default values are in boldface.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 7. Security menu items
Menu item Submenu item
Password Hardware Password
Manager
Supervisor Password
Lock UEFI BIOS
Settings
Password at
unattended boot
100
ThinkPad X1 Carbon User Guide
Value Comments
0-255 Set the timeout option for CIRA connection
to be established. Selectable second
Note: The default values are from 1 to 254.
value is 60 seconds.
If you select 0, use 60 seconds as the
default timeout value.
If you select 255, the waiting time for
establishing a connection is unlimited.
• PC ANSI Select the console type for AMT.
• VT100+
Note: This console type should match the
• PC-ANSI
Intel AMT remote console.
• VT-UTF8
Value Comments
• Disabled Manage your power-on password, supervisor
password, and your hard disk passwords.
• Enabled
• Disabled
For more information, see "Supervisor
password" on page 58.
• Enabled
• Disabled Enable or disable the function that protects
items in ThinkPad Setup from being changed
• Enabled
by a user who does not have the supervisor
password. By default, this is set to Disabled.
If you set the supervisor password and enable
this function, no one but you can change the
items in ThinkPad Setup.
• Disabled If you select and enable Password at
unattended boot, a password prompt is
• Enabled
displayed when the computer is turned on,
from either a power-off state or hibernation
state, by an unattended event such as a Wake
on LAN attempt. If you select Disabled, no
password prompt is displayed; the computer