Date And Time Menu; Security Menu - Lenovo ThinkPad S3 User Manual

Table 3. Config menu items (continued)
Menu item

Date and Time menu

To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu.
Then do the following:
1. Use the pointer keys to select System Date or System Time.
2. Type a date or time.

Security menu

To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu.
The following table lists the Security menu items. Default values are in boldface. The menu items might
change without notice. Depending on the model, the default value might vary.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 4. Security menu items
Menu item
Password
72
ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Submenu item
Console Type
Submenu item
Supervisor Password
Lock UEFI BIOS Settings
Password at Unattended
Boot
Selection
• PC ANSI
• VT100+
• PC-ANSI
• VT-UTF8
Selection Comments
• Disabled Refer to "Supervisor password" on
page 54.
• Enabled
• Disabled Enable or disable the function that
protects items in the ThinkPad
• Enabled
Setup program from being changed
by unauthorized users. By default,
this is set to Disabled. If you set
the supervisor password and enable
this function, no one but you can
change the items in the ThinkPad
Setup program.
• Disabled
If you select and enable Password
at unattended boot, a password
• Enabled
prompt will be displayed when
the computer is turned on, from
either a power-off or hibernation
state. If you select Disabled, no
password prompt will be displayed;
the computer goes ahead and loads
the operating system. To prevent
unauthorized access, you can set
Comments
If you select 255, the waiting time
for establishing a connection is
unlimited.
Select the console type for AMT.
Note: This console type should
match the Intel AMT remote
console.