Connect And Set Up A Beolink System - Bang & Olufsen BeoVision 7 Manual

16
Make link connections
To distribute video signals to link rooms, it is
necessary to connect an RF Link Amplifier to
the main room TV and a link room TV.*
Switch on the system modulator
If you have an audio setup, such as a
BeoLink Active/Passive, and you set up a
non-linkable TV in the same room, you
must set the system modulator to 'ON'.
The factory setting is 'AUTO', which must
be used if you are using a linkable Bang &
Olufsen TV.
Change the link channel
If, e.g., a TV channel in your area is
broadcasted on the same channel as the
factory setting for the BeoLink system;
channel 66, you must tune the system
modulator to an unoccupied channel.*
Useful hints
1
*Connected If an audio system is already connected to the MASTER LINK socket and
equipment you wish to connect more equipment, the Master Link cable must be
split in two and joined with the cable from the link room using a special
junction box. Contact your Bang & Olufsen retailer for assistance.
2
*Link channel When you change the link channel in the main room TV, make sure that
the link channel in the link room corresponds to it.

Connect and set up a BeoLink system

Connect and set up a BeoLink system to see pictures and hear sound in link
rooms. You can, for example, connect the living room TV to another video
system or to a set of speakers in another room.
1
TV
RF Link
Amplifier
Select 'OPTIONS' in
'TV SETUP' menu
Select 'OPTIONS' in
'TV SETUP' menu
2
Connect the Master Link cable to the
available socket marked MASTER LINK on the
TV.
To distribute video signals to link rooms,
connect an ordinary aerial cable to the socket
marked LINK TV on the main connection
MASTER
panel. Then run the aerial cable to the RF Link
LINK
Amplifier and the Master Link cable to the
link room. Follow the instructions enclosed
LINK TV
with the link room equipment.
Select 'LINK' in
Select
'CONNECTIONS'
'MODULATOR'
menu
Select 'LINK' in
Select
'CONNECTIONS'
'CHANNEL'
menu
NOTE! Only sources with an analogue signal
can be distributed from a main room TV to
the link room system.
Reveal 'ON' Accept
Find unused Accept
channel