Bang & Olufsen BeoVision 7 Manual page 49

"Greyed out" sockets on the illustration of the main connection panel may be occupied by internal connections. Do not
disconnect the cables from these sockets!
AV 3
Socket group for AV connection of additional
video equip ment.
The television keeps a signal path open between a
recorder connected to the AV1 socket and a
recordable source connected to the AV3 socket.
This allows you to set the source on AV3 to switch
on automatically, as well as set a recorder on AV1
for timed recording of the source on AV3,
provided your connected equipment supports
these functions.
AV4
Occupied by the optional Blu-ray
AV 5
Socket group for AV connection of additional
video equip ment.
PUC (AV 1 – AV 3, AV 5)
For IR control signals to external equipment
connected to an AV socket.
L-IN, R-IN (AV 1 – AV 3, AV 5)
Right and left line input.
L-R OUT (AV 1 – AV 2)
Right and left line output.
VIDEO IN (AV 1 – AV 3, AV 5)
For video signal.
VIDEO OUT (AV 1 – AV 2)
Connect a video recorder.
NOTE! Video recorders can only be connected to
the AV1 and AV2 socket groups, as these are the
only sockets groups for video output. Connect the
primary recorder to AV1 and the secondary
recorder to AV2.
Y – Pb – Pr (AV 2 – AV 3)
For video signal from an external source, e.g.
HDTV source. You can use the socket in
conjunction with an AV socket or a digital audio
socket.
SPDIF (AV 1 – AV 3, AV 5)
Digital audio input socket, e.g. DVD player.
TTL/RS232
Only for use in Hotel setups.
PUC 1+2
For an external IR-transmitter used with Home
cinema setups.
IR IN
For an extra IR-receiver when the TV is set up with
a projector.
STAND
For connection of a motorised stand.
MASTER LINK
For a compatible Bang & Olufsen audio or video
system. The socket is also used for BeoLink
distribution of sound and picture throughout the
house.
CINEMA CONTROL
For a Home Automation system.
(Ethernet)
For connection to the Internet.
VGA
Socket for connection of a High Definition video
source or a PC.
ANT (1–2)
Aerial input socket 1 (analogue) from external
aerial/cable TV network and 2 (ATSC) for ATSC tuner.
LINK TV OUT
Aerial output for distribution of video signals to
other rooms.
CENTRE 1
For connection of a centre speaker, e.g. BeoLab 7.
For further information, see the speaker's own
Guide.
POWER LINK 1–6
For connection of external speakers in a surround
sound setup.
1(SUB)
For connection of up to two Bang & Olufsen
subwoofers. A cable splitter for such connections
is available from your Bang & Olufsen retailer.
~ – Mains supply
Connection to the mains supply.
1
*NOTE! Only connect to a local area network
(LAN) that does not exit your flat, house or
building.
47