The Pincode System - Bang & Olufsen BeoVision 7 User Manual

22
The pincode system is intended to
make normal use of your television
impossible for someone who does
not know the pincode. You choose
whether or not to activate the
pincode system.
When the pincode system is activated
and the television has been
disconnected from the mains for 15–30
minutes, the pincode system goes
into effect.
When reconnected and switched on,
the television automatically switches
itself off after four minutes. Entering
the pincode returns the television to
normal.

The pincode system

Activate the pincode system
Bring up the TV SETUP menu on the screen,
activate the PINCODE menu and choose from
the submenus.
If you wish to deactivate the pincode system,
you can do so by deleting you pincode.
TV SETUP
PROGRAM GROUPS
TUNING
TIMER RECORDING
PINCODE
PLAY TIMER CONFIRM PINCODE
OPTIONS
STAND POSITIONS
GROUP1
. . .
. . .
select
GO
TV SETUP
PROGRAM GROUPS
TUNING
DELETE PINCODE
TIMER RECORDING
PLAY TIMER NEW PINCODE
OPTIONS
STAND POSITIONS
GROUP1
. . .
. . .
select
GO
NOTE! You can change your pincode up to five
times within a three-hour period.
To activate the pincode system ...
> Press MENU to bring up the TV SETUP menu.
> Press twice, followed by STOP. The PINCODE
PINCODE
menu appears on the screen.
0 . . .
> Use the number buttons or
. . . .
enter the four digits of your code. Press
back to digits you wish to correct and use
to change them.
> Press GO after the last digit is found.
> Re-enter your code to confirm it and press GO
next
again. If the two codes are not identical, the
accept
GO
input fields are cleared and you must enter the
code again.
To change or delete your pincode ...
> Press MENU to bring up the TV SETUP menu.
> Press twice, followed by STOP. The PINCODE
PINCODE
menu appears on the screen.
> Enter the correct pincode and press GO.
DELETE PINCODE is highlighted.
> To delete your code, press GO.
> To change your code, press
NEW PINCODE and press GO. Enter the new
code using the number buttons or
press GO. Re-enter the new code to confirm it.
select
GO
If you inadvertently press a wrong button while
entering a code, press STOP. The entry is
cancelled and the input fields are cleared.
on Beo4 to
to go
or
to highlight
and