Expand Your Setup - Bang & Olufsen BeoVision 7 Manual

42
Disconnect from the mains
While expanding your setup, the TV must be
disconnected from the mains.
Connect additional equipment
To operate non-Bang & Olufsen products with
Beo5, attach a Bang & Olufsen IR-transmitter to
each product. See also p. 44.
Switch on the TV
Always attach covers before you connect the
TV to the mains.
Information
'AUTO SELECTION'
'TIMER RECORDER'

Expand your setup

Your TV supports a wide range of additional equipment. You can even connect a
projector or a home automation system to control room lights and curtains.
Connect video recorders only to AV1 or AV2.
Switch off TV
Select corresponding socket
marked PUC
Attach all covers
Automatic selection of connected sources, when the TV is on and detects a signal.
Activate the Timer recording option for a connected recorder. Only available in the 'AV1' and 'AV2'
menus, and can only be activated in one of these menus at any time.
'HDMI' Equipment connected via an HDMI IN socket. If you have set the 'HDMI EXPANDER' in the
'CONNECTIONS' menu to 'YES', the 'HDMI-C' option in the 'AV' menus is replaced with 'HDMI-C1',
'HDMI-C2', 'HDMI-C3', and 'HDMI-C4'.
Disconnect TV from mains
Make the connections
Connect TV to mains supply Switch on TV