First-Time Setup Of Your Television - Bang & Olufsen BeoVision 7 Manual

50
Switch on the TV
It takes the TV approx. 20 seconds to start up and
become ready for use.
Make settings
You are led through the following settings only
when you switch on the TV for the first time.*
Calibrate the speakers
Set up the speakers to optimise sound from
your listening position.
Information
1
*TV tuner If you select 'CABLE BOX', follow the on-screen information to specify which
cable box you have connected to the TV. If you select 'ANTENNA' or 'CABLE',
a scanning process begins when you store the setting.
Connections Select the type of equipment connected to each socket, the sockets used, the
product name, and the source name.

First-time setup of your television

This first-time setup procedure is activated when the TV is connected to the mains
and switched on for the first time. If you want to change your setup at a later date,
you can access the same menus and update your settings.
TV
Switch on
Select setting
2
TUNER SETUP
CONNECTIONS
SPEAKER TYPES
TV SPEAKER ROLES
TV SPEAKER DISTANCE
SPEAKER LEVEL
SOUND ADJUSTMENT
Accept and go to next menu item
Disable or enable internal TV tuner or ATSC, see p. 35*
Register connected equipment, see p. 43
First-time setup of loudspeakers applies only to speakers for TV
viewing. After first-time setup, you can set up speakers for Home
cinema viewing. See also 'Loudspeaker setup' on pp. 52–53 and
'Surround sound and Home cinema' on p. 22.
Adjust volume, bass, treble and loudness and preset two default
speaker combinations. Select a different speaker combination at any
time. See p. 22.
2
*NOTE! When you have made the preferred
settings in a menu, you may have to press the
green button to continue to the next menu in the
first-time setup procedure. Follow on-screen
instructions.
1