Bang & Olufsen BeoVision 7 Manual page 45

Register additional equipment
Register the equipment you have connected to
the TV, if it is not detected automatically by the
TV. Repeat the procedure for each socket group.
'STANDBY OPTIONS'
Bring up 'TV
SETUP' menu
Contents of the
'CONNECTIONS'
menu
Source options in
the 'AV1–AV6'
menus
'(VGA)' Equipment connected via VGA socket (AV5 or AV6).
'(Y – Pb – Pr)' Equipment connected via Y – Pb – Pr socket (AV2 or AV3).
Set the set-top box to switch off when you switch source or when you switch off the TV. You can also
choose that the set-top box should always be switched on or that it should be switched on and off
manually by means of the remote control.
Select Select sockets in
'CONNECTIONS' in a socket group
'OPTIONS' menu and register
AV1–AV6 Register connected equipment
DISPLAY 2 Register a connected projector
Enable or disable an HDMI Expander connected to
HDMI EXPANDER
the HDMI C socket
LINK Set a link channel and enable the system modulator
Nothing connected
NONE
Connected TV tuner
TV
ATSC digital tuner
DTV
Equipment, such as a set-top box
DTV2 (V.AUX)
Connected video recorder
V .MEM
Optional Blu-ray player
DVD
Connected DVD player or recorder
DVD2
Connected PC
PC
Equipment, such as a video game console
V.AUX2
For connection of a source centre, which may
CENTRE
contain up to six built-in sources (only in the
'AV1–AV2' menus)
The above are only examples of registrations, you
can register additional equipment to any available
source option. You may also have to register
additional equipment in the Master Link system.
Select
Follow on-screen
'STANDBY
instructions
OPTIONS' menu
43