Send Diagnostic; Figure 157. Send Diagnostic; Figure 159. Diagnostic; Figure 160. Diagnostic - IBM IC35L036UWDY10 - Ultrastar 36.7 GB Hard Drive Specifications

8.34.1 SEND DIAGNOSTIC Page 0
This page requests that the drive return a list of supported pages on the next RECEIVE DIAGNOSTICS
RESULTS command.
Byte
7
0 Page Code = 0
1 Reserved = 0
2 - 3 Page Length = 0
Figure 159. Diagnostic Page 0
8.34.2 SEND DIAGNOSTIC Page 40
This allows the initiator to translate a logical block address or physical sector address to the other format.
The address to be translated is passed to the drive with the SEND DIAGNOSTIC command and the
results are returned to the initiator by the RECEIVE DIAGNOSTICS RESULTS command.
The drive will read the parameter list from the initiator and, if no errors are detected in the parameter list,
GOOD Status will be returned. The data translation will be performed upon receipt of the RECEIVE
DIAGNOSTIC RESULTS command.
Byte
7 6
0 Page Code = 40h
1 Reserved = 0
2-3 Page Length = 0Ah
4 Reserved = 0
5 Reserved = 0
6-13 Address to Translate
Figure 160. Diagnostic Page 40
Supplied Format may take one of the following three values:
- 000b Block format
- 100b Bytes From Index format
- 101b Physical Sector format
It specifies the format in which the address has been supplied.
! Translate Format specifies the format that the address should be translated into. If the supplied
format is the Block format, the Translate format must be either Bytes from Index or Physical Sector
format. If the supplied format is the Bytes from Index or Physical Sector format, the Translate format
must be Block format. If either of the format fields is invalid or they specify the same format, the
command will terminate with CHECK CONDITION status with a Sense of ILLEGAL REQUEST and
ILLEGAL FIELD IN PARAMETER LIST.
Bit
6 5 4 3
Bit
5 4 3
Ultrastar 146Z10 hard disk drive specifications
2 1 0
2 1 0
Supplied format
Translate format
159