IBM IC35L036UWDY10 - Ultrastar 36.7 GB Hard Drive Specifications page 128

is set to UNIT ATTENTION and the additional sense code indicates the cause of the
informational exception condition. The command that has the CHECK CONDITION is not
executed before the informational exception condition is reported.
3h Conditionally generate recovered error: This method instructs the drive to report
informational exception conditions, if PER (Mode Page 1) is set to one, by returning a
CHECK CONDITION status on any command. The sense key is set to RECOVERED
ERROR and the additional sense code indicates the cause of the informational exception
condition. The command that has the CHECK CONDITION completes without error
before any informational exception condition is reported.
4h Unconditionally generate recovered error: This method instructs the drive to report
informational exception conditions, regardless of PER (Mode Page 1), by returning a
CHECK CONDITION status on any command. The sense key is set to RECOVERED
ERROR and the additional sense code indicates the cause of the informational exception
condition. The command that has the CHECK CONDITION completes without error be-
fore any informational exception condition is reported.
5h Generate no sense: This method instructs the drive to report informational exception
conditions by returning a CHECK CONDITION status on any command. The sense key is
set to NO SENSE and the additional sense code indicates the cause of the informational
exception condition. The command that has the CHECK CONDITION completes without
error before any informational exception condition is reported.
6h Only report informational exception condition on request: This method instructs the
drive to preserve the informational exception(s) information. To find out about information
exception conditions the initiator polls the drive by issuing an unsolicited REQUEST
SENSE command. The sense key is set to NO SENSE and the additional sense code
indicates the cause of the informational exception condition.
7h-Fh Reserved.
! Interval Timer indicates the period in 100 millisecond increments for reporting that an informational
exception condition has occurred. The drive will not report informational exception conditions more
frequently than the time specified by the Interval Timer. After the informational exception condition has
been reported Interval Timer is restarted. A value of zero in interval Timer indicated that the drive only
reports the informational exception condition one time.
! Report Count indicates the number of times the drive reports an informational exception condition.
Report Count of 0 indicates no limits on the number of times the drive reports an informational ex-
ception condition..
Ultrastar 146Z10 hard disk drive specifications
112