Information Bytes (Byte 3 Through 6); Additional Sense Length (Byte 7); Command Specific Information (Byte 8 Through 11) - IBM IC35L036UWDY10 - Ultrastar 36.7 GB Hard Drive Specifications

without altering the medium. If an invalid parameter is found in parameters supplied as
data, the drive might have altered the medium.
6h UNIT ATTENTION
Indicates that the drive entered in the 'Unit Attention Condition'. (See Section 11.1.5 ,
"Unit Attention Condition" on page 196.)
7h-8h Not used
9h Vendor Specific
Ah Not used
Bh Aborted command
The drive aborted the command.
Ch-Dh Not Implemented
Eh MISCOMPARE
Indicates that the source of data did not watch the data read from the medium.
Fh Reserved

12.2.5 Information Bytes (Byte 3 through 6)

This field is only valid when Valid Bit is one.
! ILI = 0 : This field contains the unsigned LBA associated with the sense key. The LBA reported will be
within the LBA range of the command as defined in the CDB.
Note: An LBA other than the command LBA may be reported on the REASSIGN BLOCKS command.
! ILI = 1 : This field contains the difference (residue) of the requested length in bytes. Negative values
are indicated by two's complement notation.

12.2.6 Additional Sense Length (Byte 7)

Indicates the remaining number of bytes in the sense data. (It is always set to 18h.)

12.2.7 Command Specific Information (Byte 8 through 11)

The values in this field vary with products. Please see the individual product specification for more
details.
Ultrastar 146Z10 hard disk drive specifications
217