Alternate Status Register; Command Register; Data Register; Table 38: Alternate Status Register - Hitachi IC25N040ATMR04-0 - Travelstar 40GB Laptop Hard Drive 9.5mm 2.5 Inch Notebook HDD Specifications

2.5 inch ata/ide hard disk drive
Table of Contents

Advertisement

10.1 Alternate Status Register

Table 38: Alternate Status Register

7
6
5
4
3
2
1
0
BSY
RDY
DF
DSC
DRQ
COR
IDX
ERR
This register contains the same information as the Status Register. The only difference between this register and the
Status Register is that reading the Alternate Status Register does not imply an interrupt acknowledge or a clear of a
pending interrupt. See Section 10.12, "Status Register," on page 67 for the definition of the bits in this register.

10.2 Command Register

This register contains the command code being sent to the device. Command execution begins immediately after
this register is written. The command set is shown in Table 58: , "Command Set (1 of 2)," on page 97 and Table
59: , "Command Set (2 of 2)," on page 98. All other registers required for the command must be set up before writ-
ing to the Command Register.

10.3 Data Register

This register is used to transfer data blocks between the device data buffer and the host. It is also the register
through which sector information is transferred on a Format Track command and the configuration information is
transferred on an Identify Device command.
All data transfers are 16 bits wide, except for ECC byte transfers, which are 8 bits wide. Data transfers are PIO
only.
The register contains valid data only when DRQ = 1 is in the Status Register.
Travelstar 80GN Hard Disk Drive Specification
64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents