Mounting Hole Locations; Connector And Jumper Description - Hitachi IC25N040ATMR04-0 - Travelstar 40GB Laptop Hard Drive 9.5mm 2.5 Inch Notebook HDD Specifications

6.4.2 Mounting hole locations

The mounting hole locations and size of the drive are shown below.
Figure 2: Mounting hole locations

6.4.3 Connector and jumper description

A jumper is used to designate the drive address as either master or slave. The jumper setting method is described in
Section 7.10, "Drive address setting" on page 55.
Connector specifications are included in Section 7.2, "Interface connector" on page 39.
Travelstar 80GN Hard Disk Drive Specification
32