Table 6-35 Self-Test Results Values - Hitachi DK32EJ - Ultrastar Series 36.9 GB Hard Drive Reference Manual

Self-Test
Results
Value
0
H
1
H
2
H
3
H
4
H
5
H
6
H
7
H
8 -E
H H
F
H
The Self-Test Number field identifies the self-test that failed and consists of either:
1) the number of the segment that failed during the set-test; or
2) the number of the test that failed and the number of the segment in which the
test was run, using a vendor specific method for placing the two values in the
one field.
When the segment in which the failure occurred cannot or need not be identified,
the Self-Test Number field shall contain 00
The Time Stamp field contains the total accumulated power-on hours for the
device server at the time the self-test was completed. If the test is still in progress,
the content of the Time Stamp field shall be zero. If the power-on hours for the
device at the time the self-test was completed is greater than FFFF
content of the Time Stamp field be FFFF
LOG SELECT:(4Ch)
6 COMMAND DESCRIPTIONS

Table 6-35 Self-Test Results Values

The self-test completed without error.
The background self-test was aborted by the application client
using a SEND DIAGNOSTIC command(see 6.29) with the Self-
Test Code field set to (100)b (Abort background self-test).
The self-test routine was aborted by an application client using a
method other than a SEND DIAGNOSTIC command(see 6.29)
with the Self-Test Code field set to (100)b.
An unknown error occurred while the device server was executing
the self-test and the device server was unable to complete the
self-test.
The self-test completed with a failure in a test segment, and the
test segment that failed is not known.
The first segment of the self-test failed.
The second segment of the self-test failed.
Another segment of the self-test failed (see the Self-Test Segment
Number field).
Reserved
The self-test is in progress.
Description
.
H
.
H
OEM MANUAL:K6602771
then the
H
Revision: 2 / Date: 2002.12.19
Page: 151 / 313