Playback; Preparations; Before Playing A Disc; Before Playing A Usb Or An Ipod - Denon DCD-F107 Owner's Manual

Playback

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<DISC/USB> Disc tray
<ON/STANDBY>
ON/STANDBY
[CD / ]
1 3

Preparations

Before Playing a Disc

BUTTON
<BUTTON>
1
Turn the DCD-F107 power on.
[BUTTON]
<ON/STANDBY>
(Press
If no disc is loaded "NO DISC" is displayed.
<5> <1/3>
When system connections (vpage 14) are made, turn on the
b
power of the DRA-F107 first, then turn on the DCD-F107's power.
2
<DISC/USB>
Press
to "DISC".
3
Insert a disc (vpage 3).
<5>
• Press to open/close the disc tray.
• The disc tray also closes when
pressed.
USB port
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.
1
).
b
2
to set the playback media mode
<1/3> [CD 1/3]
or is
The playback media mode setting remains in the memory, even when
the power is set to standby.
n Turning the Power Off (to the standby mode)
• Be sure to stop playback before turning the power off.
• Make sure that the disc tray is completely shut before turning off the
power.

Before Playing a USB or an iPod

Turn the DCD-F107 power on.
<ON/STANDBY>
(Press ).
When system connections (vpage 14) are made, turn on the
power of the DRA-F107 first, then turn on the DCD-F107's power.
Connect USB memory device or iPod connection
cable.
When the USB memory device or iPod is connected to the USB
port on the DCD-F107 , the source media mode automatically
switches to "USB" and file playback begins.
ON/STANDBY
Press again.
NOTE
ENGLISH