Playing Tracks In A Specific Order (Program Playback) - Denon DCD-800NE Owner's Manual

Contents Connections
Playing tracks in a specific order
(Program playback)
Up to 25 tracks can be programmed.
1
In the stop mode, press PROGRAM.
"PGM" appears on the display.
2
Use 0 – 9 and +10 to select the tracks.
GExampleH
To program tracks 3 and 12 to be played in that order, press 3, +10
and 2 one after the other.
3
Press 1/3.
Playback starts in the programmed order.
0 When REPEAT is pressed during program playback, the tracks are played
repeatedly in the programmed order.
Front panel Display
Playback Settings
o Checking the order of the programmed tracks
In the stop mode, press 9.
The track numbers are displayed in the programmed order each time
the button is pressed.
o To clear the last track programmed
In the stop mode, press CLEAR.
The last track programmed is cleared each time the button is pressed.
o Clearing the all programmed track
In the stop mode, press PROGRAM.
29
Rear panel
Tips
Remote Index
Appendix