Using Myfi In Your Vehicle; Audio Quality - Delphi xm2go MyFi SA10113 User Manual

Using MyFi In Your Vehicle

Because every vehicle is different, we can only provide
some general guidelines. If you need help, consult a
professional installer.
1. Decide which method (cassette adaptor, wireless FM
transmitter, or wired connection) is best for your
vehicle and location.
2. Always do a trial run before installing anything
permanently. Temporarily connect all power, audio,
and antenna lines. Make sure that you receive the
XM signal and that you hear XM programming
through your vehicle's audio system. You must have
your vehicle antenna plugged in to the cradle to
receive the signal.
TIP: Your MyFi battery will charge in the vehicle cradle
only while the MyFi power is turned ON. Please refer to
"Other Things You Should Know" (page 35) for addi-
tional information regarding charging the MyFi battery.

Audio Quality

Cassette Adaptor:
Wireless FM:
Audio quality
Use the CASSETTE ADAPTOR if your vehicle's audio
system has a built-in cassette player.
Good
Wired FM:
Better Best
29