Using Myfi At Home - Delphi xm2go MyFi SA10113 User Manual

Using MyFi At Home

Turn off your MyFi and your audio system. Connect
your MyFi to your audio system in either way illustrated
below.
If you use the home stand and connect it to a stereo,
you must plug in the AC adaptor and home antenna.
Your MyFi's audio output will not work if these are not
connected.
If you attach your MyFi to powered speakers, adjust the
audio level using the speakers' volume control.
TIP: If you hear nothing, try adjusting the volume controls
located on your MyFi. If there does not appear to be
power, check all connections and make sure all plugs are
inserted completely.
27