Direct Tune: Select Channels Faster; Setting Time Features - Delphi xm2go MyFi SA10113 User Manual

Direct Tune: Select channels faster

Normally as you rotate the dial, you can preview what's
playing on other XM channels before you push the dial
in to select a channel. To automatically tune to the
channel without pressing the dial, you can set the
following option:
1. Use the "menu" button and dial to select "Channel
Access."
2. Select "Direct Tune."
3. Select "Direct Tune On." (To return to the factory-
default method, select "Direct Tune Off.")

Setting time features

XM automatically sets the minutes of your MyFi's built-in
clock. You can adjust the hours by time zone, choose
12- or 24-hour formats, and choose whether Daylight
Savings Time is used in your area.
Your MyFi also has a sleep timer and an alarm. You can
set the sleep timer to shut off your MyFi automatically
after 15 minutes or up to an hour. The alarm turns on
your MyFi at a certain time; you can choose to be alerted
by a beep or by XM programming.
Important!: If you use your MyFi in your vehicle, you can
choose whether your ignition key automatically powers
on your MyFi. Choose the "Vehicle Mode" menu, and
then the "Auto On/Off". Set to "On" to turn MyFi on or
off with the ignition key. Set this option to "Off" if your
MyFi is connected to power that is always live; you must
then use MyFi's power button to turn it on or off.
For vehicles with power outlets that are always powered,
we recommend that you use the "Delayed Power OFF"
feature. This avoids draining your vehicle battery if your
MyFi is left on.
25