Connecting To A Stereo; Receiving The Xm Signal - Delphi xm2go MyFi SA10113 User Manual

Connecting to a stereo

Plug the AC adaptor into an outlet. Connect the home
antenna and connect the line out to either your home
stereo or powered (PC type) speakers.

Receiving the XM signal

Turn your MyFi on by pressing the power button. You
should be able to hear channel 1, the XM Preview
Channel. If you do not, and the screen displays "NO
SIGNAL," try moving your MyFi's antenna to another
location. Make sure the antenna points south, either
outdoors or through a window. If the "NO SIGNAL"
message persists, refer to "Aiming the home antenna"
(page 28).
Please read the TIP below the illustration for optional
setup and activation procedure information.
TIP: Establishing a good signal environment in the home
setup is highly desirable, but this is not the only way you
can receive the XM signal. As an option, you can refer to
"Using MyFi In Your Vehicle" (page 29) and continue
this setup and activation process with your MyFi installed
in a vehicle.
5V DC ANT LINE OUT
Aim antenna
Connect to stereo
13