Table of Contents
Advertisement
Aiming the home antenna
Your MyFi can help you aim the home antenna to pull in
the strongest signal available.
1. Using the "menu" button and dial, choose
"Antenna Aiming."
2. Slowly turn and tilt the antenna. The signal bars on
the display will change. Find the position that gives at
least two bars on either "satellite" or "terrestrial."
3. The antenna aiming screen remains as long as it's
needed to help you position the antenna. When
you've found the best position, press the "menu"
button to return to normal operation.
TIP: If you experience difficulty obtaining a strong
antenna signal based on your particular home setup
conditions, a home antenna extension cable (model
XMAC1000, sold separately) was designed specifically
to help you and is available at www.xmradio.com along
with many other cool XM Satellite Radio accessories.
28
Using MyFi In Your Vehicle
Because every vehicle is different, we can only provide
some general guidelines. If you need help, consult a
professional installer.
1. Decide which method (cassette adapter, professional
wired FM, or self install via the XM SureConnect) is
best for your vehicle and location.
2. Always do a trial run before installing anything
permanently. Temporarily connect all power, audio,
and antenna lines. Make sure that you receive the
XM signal and that you hear XM programming
through your vehicle's audio system. You must have
your vehicle antenna plugged in to the cradle or the
XM SureConnect to receive the signal.
TIP: Your MyFi battery will charge in the vehicle cradle
only while the MyFi power is turned ON. Please refer to
"Other Things You Should Know" (page 35) for addi-
tional information regarding charging the MyFi battery.
Audio quality
Use the CASSETTE ADAPTER if your vehicle's audio
system has a built-in cassette player.
29
Advertisement
Table of Contents
