Installation - Sanyo DVR-SD450 Operating Instructions Manual

FAVOURITES
Any channel can be a favourite channel and the Favourites menu is used to label those channels you want
as favourites.
In channel list highlight "Favourites" by pressing 4 key and then highlight each channel that you desire,
using the 5/6 keys and press SELECT. A channel selected as a favourite appears in the main favourite list
with a favourite icon next to the channel name. The favourite status of a channel can be removed by
repeating this procedure. Leave the Favourites menu by pressing MENU.
Once the desired channels have been marked as favourite channels, the favourite mode can be activated to
allow easy access to them. Press the MENU key to display the Main Menu and highlight Configuration and
press SELECT to open Configuration screen. Highlight the Favourite Mode line and use the 3/4 keys to
change the status and press SELECT to apply the settings.
When you leave the Configuration menu by pressing MENU the favourite mode is activated. Now, changing
channel using the PROGRAM + /- keys will switch to only those channels marked as favourites in the
channel list. Similarly, the on-screen list in the electronic program guide contains only the favourite channels.
You can still access all the channels in the channel list by keying in their channel list number or by selection
from the Channel List screen.
Alternatively you can switch off the favourite mode from the Favourite Mode line of the Configuration menu
or by pressing FAV button on the remote control .
Hint: The favourite mode can only be activated if one or more channels in the channel list are marked as
favourites. Similarly, if the favourite status is removed from all the channels in the Channel List, the favourite
mode is turned off automatically.

3.2 INSTALLATION

AUTOMATIC SEARCH
Although your FreeView receiver will not loose its settings or
stored channels when switched off, you may wish to reinstall the
receiver because you have moved to a different area with
different broadcast frequencies, you wish to reinstate a channel
previously deleted from the channel list, or you want to watch
new channels which have started broadcasting.
Press the MENU key to display the Main Menu and using the
5/6 keys, highlight the Settings line and press SELECT to
display Settings Menu. Then highlight Installation line and press
SELECT to open the Installation Menu. You can either perform
an automatic search or manual search to add channels.
MANUAL SEARCH
The FreeView receiver can search for channels automatically
(searching all the broadcast frequencies for free-to-air channels)
or manually (searching one specified broadcast frequency only
for any channels to be found there).
This is for searching for digital channels on a single broadcast
frequency. The frequency channel number (21-68) is entered in
the box at the top left of the screen and the received signal level
and signal quality can be observed on the two bar graphs at the
bottom. When SELECT is pressed, the receiver searches that
frequency and display a list of the channels found before
returning to the Installation menu.
31