Safety Information; Warning - Sanyo DVR-SD450 Operating Instructions Manual

SAFETY INFORMATION

This unit is a class 1 laser product. However this product uses a visible laser beam which could cause
hazardous radiation exposure.
Be sure to operate the recorder correctly as instructed.
While this recorder is plugged to the wall outlet, do not place your eyes close to the opening of the disc tray
or other openings to look inside the recorder for your own safety.
Use of performance control or adjustment procedures other than those specified may result in hazardous
radiation exposure. Do not open the covers and do not attempt to repair any damaged parts. Please refer to
a service technician or qualified personnel for any necessary repairs.
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
To reduce the risk of fire or electric shock, and any interference, use the recommended accessories only.
The device shall not be exposed to dripping or splashing and no objects filled with liquids, such as
The mains plug or the appliance coupler is used as the disconnect device, the disconnect device
Do not move your device for 20 seconds after removing AC power to ensure that the actuator is completely
locked. This helps prevent the media and the heads from accidental damage due to vibration, moving or
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
CAUTION
Wave length:
Maximum output of accessible laser radiation:
Classified according to IEC 60825-1:

WARNING

WARNING
vases, shall be placed on the apparatus.
shall remain readily operable.
shipping.
CAUTION
LASER CLASS 1
650 nm (DVD)
790 nm (CD)
< 0,39 mW (continuous wave)
1993 + A1: 1997
6