Av-2; Freeview Menu; Channel List - Sanyo DVR-SD450 Operating Instructions Manual

2.6.6 AV-2

3. FREEVIEW MENU

In FreeView Mode, if you press MENU key on remote control, this menu will be
displayed.

3.1 CHANNEL LIST

Here, you can preview any channel stored by the receiver before viewing it full
screen. The complete list of channels is displayed in pages of 10 channels at a
time, with their channel list number. The name and a quarter-screen preview of
the channel last viewed is displayed in the top right of the screen.
that make up a channel name can be highlighted using the3/4 keys and the highlighted character changed
by pressing the 5/6keys to cycle through the alphabet, numbers and other characters available.
CHANNEL LOCK
Some channels broadcast material which you do not want younger members of the family to watch. Any
channel can be 'locked' so that it cannot be selected for viewing without first a four-digit PIN code being
entered. In this way any channel not suitable for younger viewers can be protected.
The channel lock is applied in the Channel List menu. Highlight the channel to be locked using the 5/6
keys. You can move through the list 10 channels in one jump using RED or GREEN. Now select the LOCK
button at the base of the screen with the 3/4 keys and press SELECT.
NOTE: Do not forget your new password. Otherwise you can use the password which is stated at last page,
to enter the locked channel.
A window requesting the PIN code is displayed and the four-digit code should be entered using the number
keys on the remote control, followed by the SELECT key. A lock icon is then displayed alongside the channel
name in the channel list.
You can now leave the Channel List screen and return to normal TV viewing by pressing MENU. Any
attempt to change channel to the locked channel will now display the same window requesting the PIN code
and the channel will only be displayed on entry of the correct code. To remove the lock on a channel, repeat
the same process as to lock the channel.
This menu option allows you to set AV-2 as "Decoder" or "SCART
CVBS" output.
When "Decoder" option is selected, "SCART" is removed from the
available video sources list and an additional menu item ("Decoder
On/Off") is added into "Modify Channel" menu.
In the "Modify Channel" menu, if you select Decoder option as "On",
you can watch scrambled channels with appropriate decoder.
Otherwise, when "SCART CVBS" is selected, AV-2 continues to stay
in available sources list.
DELETE
To delete a channel from the list, highlight the channel to be
deleted using 5/6 keys, then highlight the DELETE button
using 3/4 and press SELECT. The highlighted channel is
deleted from the list after confirmation.
EDIT NAME
The channel names which appear in the channel list and
the information banner are assigned by the broadcasters.
You can edit the names to suit your preferences with the
Edit Name function. Highlight the channel to be renamed,
highlight the EDIT NAME button at the base of the screen
using the 3/4 keys, and press SELECT. The highlighted
channel name appears on the right of the screen with the
first character highlighted by a cursor. Any of the characters
30