Table of Contents
Advertisement
Chapter 2
Camera Installation
Use the included wrench and tighten the four dome cover screws to secure the dome cover to the camera.
Step 13
Make sure all parts of the camera are securely installed.
What to do next
Complete the following procedures:
After you install the IP camera, follow the instructions in the
•
Camera" section on page 3-1
After completing the initial setup, use the IP camera user interface to adjust the focal length and
•
zoom factor. For more information, see the
page
OL-28120-02
to access the IP camera through your network.
4-3.
"Performing the Initial Setup of the IP
"Adjusting the IP Camera Focus and Zoom" section on
Cisco Video Surveillance 6020 IP Camera Installation Guide
IP Camera Installation
2-13
Advertisement
Table of Contents
