Table of Contents
Advertisement
Chapter 4
Camera Management
Table 4-4
Control
Speaker Volume slider
and field
Microphone
Sensitivity slider and
field
Camera Settings
Up Arrow toggle
button
Down Arrow toggle
button
Save button
Picture Adjustments
Note
Brightness slider
Contrast slider
OL-28120-02
Camera Video & Control Window Controls (continued)
Description
When the speaker is unmuted, drag this slider to adjust the volume at which
your PC speakers play the audio from the IP camera, or enter a value from 0
through 100 and press the Enter key.
The default value is 50.
Drag this slider to adjust the gain of the PC microphone (that is, how sensitive
it is to the audio that it picks up and that is sent to the IP camera), or enter a
value from 0 through 100 and press the Enter key.
The default value is 50.
Click the Up Arrow to display the camera settings. The button changes to the
Down Arrow button
Click the Down Arrow button to hide the camera settings. The button changes
to the Up Arrow button.
When the Up Arrow is clicked to display the camera settings, three drawers
appear to the right of the video image. The camera settings are grouped into
the three drawers as follows:
Picture Adjustments
•
Exposure Control
•
Advanced Settings
•
To view the settings within a drawer, click on it to expand it. To hide the
settings, click on the drawer to collapse it.
Saves the current camera settings configuration.
These controls appear when you click Camera Settings Up Arrow > Picture Adjustments
drawer.
To control the brightness of the video image, drag the slider, or enter a value
from 1 through 10 and press the Enter key. A higher value increases the
brightness and a lower value decreases the brightness. For example, if the IP
camera is facing a bright light and the video appears too dark, you can increase
the brightness.
The default value is 5.
To control contrast of the video image, drag the slider, or enter a value from 1
through 10 and press the Enter key. A higher value increases the contrast and
a lower value decreases the contrast.
The default value is 5.
Cisco Video Surveillance 6020 IP Camera Installation Guide
Viewing Live Video
4-7
Advertisement
Table of Contents
