Table of Contents
Advertisement
Chapter 2
Camera Installation
While viewing video from the IP camera, perform the following steps to adjust the 3-axis field of view:
Step 11
Grip the two tilt adjustment screws and pan the IP camera left or right.
a.
Loosen the two thumb screws, tilt the IP camera, then tighten the thumb screws.
b.
Rotate the IP camera to adjust the image horizontal orientation.
c.
Step 12
Install the black cover. Make sure to adjust the it inside the dome and trim ring assembly so that it does
not block the lens from capturing video.
Attach the security strap from the dome and trim ring assembly to the camera housing using the included
Step 13
screw.
Attach the dome and trim ring assembly by positioning its pegs in the slots of the camera housing and
Step 14
twisting clockwise.
OL-28120-02
Cisco Video Surveillance 6020 IP Camera Installation Guide
IP Camera Installation
2-9
Advertisement
Table of Contents
