Download Print this page

Powering On/Off The Projector; Powering On The Projector - Acer PD125D Quick Start Card

Xga single chip 0.55” dlptm projector
Hide thumbs

Advertisement

Turn on the projector
first and then the signal
sources.

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will flash green.
3. Turn on the lamp by pressing "Power/Standby" button on the
control panel. And the Power LED will turn green.
4. Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
If the screen displays "No Signal", please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, using the
"Source" button on the remote control or control panel to
switch.
Installation
1
Power/Standby
... English
11

Advertisement

loading

  Related Manuals for Acer PD125D