Netvanta 3430; Netvanta 3430 Features And Specifications - ADTRAN NetVanta 3200 series Hardware Installation Manual

Hide thumbs Also See for NetVanta 3200 series:
Table of Contents

Advertisement

NetVanta 3200/3300/3400 Series
NetVanta 3305 Rear Panel Interfaces and LEDs
NET/DBU Option Slots
The
SLOT x NET/DBU
modules are described in the section
10/100Base-T Ethernet Interface and Activity LEDs
The Ethernet ports (
flashes when data traffic is being sent or received on the Ethernet port. The green link LED is on when
the router has a good connection to the LAN. The Ethernet port provides the following:
10Base-T or 100Base-T with a single connector
Auto-negotiation
CSMA/CD
IEEE 802.3 compatibility
CONSOLE Interface
The
interface is an EIA-232 serial port (DCE) that provides for local management and
CONSOLE
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
Power Connection
The rear panel has a power input for connection to the power supply. Power supplies are shipped with
final destinations in mind. For example, domestic routers are shipped with a wallmount supply and
international routers are shipped with a universal input lump-in-line supply with the appropriate
cables. All of the 1U-high products have universal power supplies and are shipped with the appropriate
cable. Please refer to

NetVanta 3430

The NetVanta 3430 is a high-performance, modular IP access routers designed for cost-effective branch
office connectivity over MPLS, Frame Relay, multilink Frame Relay, PPP, MLPPP, or Ethernet networks.
For information on switch configuration for a specific application, refer to the configuration guides provided on
the
ADTRAN Support
Community. For details on the command line interface (CLI), refer to the
Command Reference
Guide. All other related documents are also available online at
http://supportforums.adtran.com.

NetVanta 3430 Features and Specifications

Single-slot, dual-Ethernet modular IP router
Modular Network Interface: 56K/64K DDS, T1/FT1, T1/FT1 + DSX-1, Dual T1, E1/FE1, E1/FE1 +
G.703, or ADSL (Annex A or Annex B), SHDSL (Annex A or Annex B), serial, or USB WWAN
Modular IP access routers for MPLS, Frame Relay, multilink Frame Relay, PPP, MLPPP, PPPoE,
ATM, and HDLC networks
High-performance processor
Hardware encryption engine embedded
On-board Flash memory
61200860L1-34AB
option slots support various NIM plug-in option modules. These option
Option Modules on page
ETH 0/1
and
ETH 0/2
) are RJ-45 connectors with LEDs. The amber activity LED
Supplying Power to the Unit on page 69
Copyright © 2012 ADTRAN, Inc.
Physical Descriptions
41.
for connection details.
AOS
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents