Allied Telesis AT-WA7400 Datasheet

Datasheet | Wireless LAN
AT -WA7400
Dual-radio Enterprise-class Wireless LAN Access Point
AT -WA7400-xx
Dual-radio Enterprise-class Wireless Access
Point
Compact, Feature-Rich Design
The AT-WA7400 dual-radio enterprise-class
wireless access point includes radios that
operate within both 2.4GHz and 5GHz
frequency bands. It is fully compliant with IEEE
802.11a, b, g, and h standards and offers
superior performance with the latest security
features and a suite of advanced management
tools.
Advanced Security
The AT-WA7400 is equipped with advanced
encryption and authentication capabilities,
including: WPA/WPA2, WEP with weak IV
avoidance,TKIP, AES/CCMP encryption, MAC
address filtering, access control via Radius with
EAP and PEAP.
Secure your wireless network by segmenting
public and private access with multiple BSSIDs,
MAC addresses and VLAN Tagging. Rogue AP
detection provides the ability to detect and
locate unauthorized access points, thus
preventing unauthorized entry to your wireless
network.
Allied Telesis
Advanced WLAN
Management Features
The AT-WA7400 supports a wide range of
Wireless LAN (WLAN) management functions
such as adjustable output power levels, wireless
bridging (WDS), automated roaming, remote
configuration and software upgrades.
AT-WA7400 offers an advanced load balancing
feature, which allows you to balance the
distribution of wireless client connections across
multiple access points improving performance
and bandwidth utilization.
Configuration and administration are automated
across a network of AT-WA7400 access points,
reducing the need for IT personnel to configure
complex meshes.
These features help make your WLAN an
integral part of your whole wireless network.
Key Features
• High-performance 54Mbps (IEEE 802.11a/h/g)
data rate
• Security support via IEEE 802.11i (WPA2),
WPA-PSK,TKIP, AES, IEEE 802.1x, and
EAP/802.1
• Multiple BSSID and Virtual LAN (VLANs)
• Inhibit SSID broadcast and ignore SSID scan
• Media Access Control (MAC) for wireless
Interface
• Load balancing
• IEEE 802.11e (WMM only)
• Wireless Distribution System (WDS)
for wireless bridge and repeater modes
support
• AP Clustering
• Rogue AP detection
• Transmit power control/limiting
• Secured AP management
• Power-over-Ethernet capable
• Wi-Fi and WPA certified
• Dynamic frequency selection and transmit
power control for IEEE 802.11h compliance
• Healthcare environment ready (EN 60601)
www.alliedtelesis.com