Choosing Touchscreen Items; Cleaning And Maintaining The Touchscreen - Cisco 7970 Series Phone Manual

Call activity
5
area
Phone tab
6
Feature tabs
7

Choosing Touchscreen Items

There are three ways to choose items on your phone's touchscreen.
To choose a
touchscreen item...
By touch
By item number
By scrolling

Cleaning and Maintaining the Touchscreen

You can use the Display button
illuminates to indicate changes in touchscreen status:
Green, steady—Touchscreen is in sleep mode
Green, flashing—Touchscreen is disabled
If you want to...
Disable the touchscreen
for cleaning
Cisco Unified IP Phone 7970 Series Phone Guide for Cisco Unified Communications Manager 6.1(3)
Displays current calls per line, including caller ID, call duration, and call state
for the highlighted line (standard view). Items in this area are touch-sensitive.
See Understanding Line and Call Icons, page
page 33.
Indicates call activity. Press this tab to return to the call activity area, if needed.
Each indicates an open feature menu. Tabs are touch-sensitive. See
Understanding Feature Buttons and Menus, page
Do this...
Press (or tap) touch-sensitive items on the touchscreen with your fingertip.
Use only your fingertip to press the touchscreen, as using any other objects
could damage the display. Be aware that pressing a phone number can cause the
phone to dial the number.
Press the corresponding number on your keypad. For example, press 4 to
choose the fourth item in a menu.
Press the Navigation button to highlight an item. Press a softkey to finish the
action, or tap the item on the touchscreen with your fingertip.
to disable and enable the touchscreen. The Display button
Then...
Press and hold for more than one second.
The screen remains disabled for about a minute, unless you enable it.
An Overview of Your Phone
19, and Viewing Multiple Calls,
22.
flashes.
-21