Cisco 2900 series Installation Manual page 178

Installing and Removing PVDM2s
Figure 5-20
Figure 5-20
Figure 5-21
Figure 5-21
Insert the PVDM2 at a 45-degree angle to the adapter while aligning the key notch. Ensure that the entire
Step 3
connector seats into the adapter across its entire length, and push the PVDM2 firmly into the adapter.
Cisco 2900 Series and 3900 Series Hardware Installation Guide
5-26
shows a retainer clip open.
Retainer Clip Open (Up Position)
show a retainer clip closed (DOWN).
Retainer Clip Closed (Down Position)
Chapter 5 Installing and Upgrading Internal Modules and FRUs
OL-18712-03