Replacing Front Clearance And Identification Lamp Bulbs; Replacing Fog Lamp Bulbs; Replacing Brake/Tail/Turn/Reverse Lamp Bulbs - Ford Super Duty Owner's Manual

Replacing Front Clearance and Identification Lamp Bulbs

(If Equipped)
Install the bulb(s) in reverse order.
Replacing Fog Lamp Bulbs (If Equipped)
Install the new bulb(s) in reverse order.
Replacing Brake/Tail/Turn/Reverse Lamp Bulbs (Pickups Only)
4. Pull the bulb straight out of the socket.
Install the new bulb(s) in reverse order.
2013 F-250/350/450/550 (f23)
Owners Guide gf, 2nd Printing, December 2012
USA (fus)
Maintenance
1. Make sure the headlamps are off.
2. Remove the screw and lens from
the lamp assembly.
3. Pull the bulb straight out of the
socket.
1. Make sure the headlamps are off.
2. Remove the bulb socket
from the fog lamp by turning it
counterclockwise.
3. Disconnect the electrical
connector from the fog lamp bulb.
1. Make sure the headlamps are off,
then open the tailgate to expose the
lamp assemblies.
2. Remove the two bolts from the tail
lamp assembly and carefully pull the
lamp assembly from the tailgate pillar
by releasing the two retaining tabs.
3. Rotate the bulb socket
counterclockwise and remove from
lamp assembly.
329