Programming/Changing Optional Settings; Clearing All Mykeys - Ford Super Duty Owner's Manual

3. From the main menu within the information display, use the right
arrow key > or OK to select SETTING and then MYKEY.
4. Press > or OK to select CREATE MYKEY.
5. Hold OK as prompted until you see MARK THIS KEY AS
RESTRICTED in the information display screen.
The key is successfully programmed. Make sure you label it so you can
distinguish it from the admin keys.
You can also program optional settings for the key(s). Refer to the
Programming/Changing Optional Settings section .

Programming/Changing Optional Settings

Note: All programmed keys can be cleared within the same key cycle in
which a key was programmed, otherwise an admin key is required to
clear the keys. To clear all keys, see Clearing all MyKeys.
You can access the optional settings through the information display
control.
1. Turn the ignition on using an admin key.
2. Access the main menu and select Settings, then MyKey.
3. Use the arrow buttons to get to an optional feature.
4. Press OK or > to scroll through settings.
5. Press OK or > to make a selection.

CLEARING ALL MYKEYS

You can clear the programming while you create a MyKey or use an
admin key to clear the restrictions. When you clear the restrictions, you
return the key to its original admin key status.
To clear your MyKey, use the information display to do the following:
For Type 1 information display settings:
1. Press SETUP until PRESS RESET TO CLEAR MYKEY displays.
2. Press and release the RESET button. The display will show HOLD
RESET TO CONFIRM CLEAR.
3. Press and hold the RESET button for two seconds until ALL
MYKEYS CLEARED displays.
2013 F-250/350/450/550 (f23)
Owners Guide gf, 2nd Printing, December 2012
USA (fus)
MyKey 69