Replacing Front Parking Lamp/Turn Signal Bulbs - Ford f150 2001 Service Manual

Maintenance and care
10. Install bulb retaining ring over the plastic base and lock the ring into
the socket by turning it clockwise until you feel a "stop."
11. Connect the electrical connector into the plastic base until it "snaps."
12. Straighten alignment pins,
making them parallel with the outer
edges of the attachment standoff.
13. Carefully insert the headlamp
assembly into the vehicle making
sure the alignment pins are inserted
into the proper holes and into the
guide ribs.
14. Hold the headlamp assembly
snugly against the vehicle and push down on the clips to lock the lamp
into place.

Replacing front parking lamp/turn signal bulbs

1. Remove screw from the lamp
assembly.
2. Disengage lamp assembly (it has
a snap fit) by pulling straight
forward.
3. Remove bulb socket from the
parking lamp assembly by turning it
counterclockwise.
4. Pull bulb straight out of socket
and press in the new bulb.
5. Install the bulb socket into the
lamp assembly by turning clockwise.
251
I n f o r ma t i o n P r o v i d e d b y :