Advertisement
OPERATING INSTRUCTIONS
TO LOWER PICTURE SURFACE
Pull screen down all the way. HESITATE – then allow screen to retract VERY SLOWLY until it locks in place.
TO RAISE PICTURE SURFACE
Pull down on the pull bail, then release quickly. The screen will retract gently into the case.
TO ADJUST RETRACTION SPEED
Use a large flat screwdriver to turn the adjustment knob on the
right end of the screen. To increase the travel speed turn
counterclockwise. To decrease the travel speed turn clockwise.
Adjustments should be made in half turn increments and travel
speed checked before adjusting further.
NOTE: This feature is not available on some large screen sizes.
Call the factory for adjustment instructions.
If screen locks at the bottom and will not retract, turn adjustment knob
one quarter turn counterclockwise.
SCREEN ACCESSORIES
WALL BRACKETS (75# per pair maximum)
Da-Lite No. 6 and No. 11 Non-adjustable wall brackets
and No. 23 adjustable extension wall brackets are ideal
for keystone elimination, clearance, or corner mounting.
The screen brackets should be fastened to the studding
or other solid surface and not in the plaster only.
Suspend screen from "D" rings.
T-BAR CLIP
For Dropped Ceilings
50 lb. max. load capacity.
2
No. 23 ADJUSTABLE
WALL BRACKETS
Screen can be extended 10",
14", 15
⁄
", 18
⁄
", 20" or 24" from
3
1
4
4
wall by wing nut and bolt`
adjustment.
No. 11 WALL BRACKETS
Screen can be extended 10"
or 14" from wall by changing
position of bracket.
No. 6 WALL BRACKETS
Screen can be extended 6"
from wall.
TILT LOCK
For Keystone Elimination
Holds back bottom of
screen in tilted position
to eliminate keystoning.
Advertisement
