Da-Lite mOdel b Operating Instructions page 2

Model b with csr

Hide thumbs Also See for mOdel b:

YOU HAVE MADE A WISE SELECTION...

in choosing a Da-Lite projection screen designed and engineered to produce the sharpest, most pleasing

pictures with the maximum convenience.

PROTECT YOUR SCREEN by keeping it rolled in its protective case when not in use. Always examine both front and back of

surface before re-rolling into case to make certain screen is free of dust, dirt or other foreign matter. Use a very soft

duster to gently remove any foreign particles.

QUALITY FEATURES FOR BETTER PICTURES, EASIER OPERATION, LONGER LIFE

• Exclusive Camlok

Roller System

• Attractively styled

• Easily installed

• Economically priced

INSTALLATION

Care in mounting and care in correct operation will mean a long and satisfactory life for your Da-Lite wall/ceiling screen.

Locate the screen where the audience can best see it and where other furnishings in the room permit. Mount the screen

so that bottom of picture surface, when fully extended, will be above the heads of viewers.

BUILT-IN HANGERS

Da-Lite wall/ceiling screens may be mounted on a wall,

map rail, suspended from ceiling or extension brackets.

Wall screens must be mounted level and with the case-

back parallel to the wall.

FOR WALL MOUNTING –

Use the keyhole slot at the back of the hanging bracket

for flush wall suspension. Position screws or other

fasteners into the wall and hang screen by using the

slots.

FOR MAP RAIL MOUNTING –

Use keyhole slots in flat brackets. Do not use "D" rings.

FOR CEILING SUSPENSION

If the screen is to be ceiling mounted, two screw hooks

should be placed in a beam or other solid surface. For

drop ceilings, Da-Lite's T-Bar Clips may be purchased.

• Completely self-storing

• Ideal for houses of worship, schools, family centers and

industrial training rooms.

For the finest in film and video projection

FOR

WALL

FOR

CEILING