Denon ADV-M71 Operating Instructions Manual page 9

Dvd surround receiver
Hide thumbs Also See for ADV-M71:
Table of Contents

Advertisement

CAUTION:
• Only one MD recorder and one cassette deck can be connected to the ADV-M71 using system connections. System operations cannot be
performed properly if two MD recorders or two cassette decks are connected using system connections.
• Whenever the power operation switch is in the STANDBY position, the unit is still connected to AC line voltage.
• Please be sure to unplug the power cord when you leave home for, e.g.,a vacation, etc.
System operations
Such system operations as the timer and the auto power on functions, as well
as remote control operations cannot be performed unless all the RCA pin-plug
cords and system connector cords are connected between the units, so be sure
to make all the connections properly as shown in the diagram. Also,
disconnecting system connectors while the system is operating may result in
malfunctions. Be sure to unplug the power cord before changing connections.
R
L
R
L
Stereo audio cord
MD recorder
(DMD-M31)
(sold separately)
B
DVD SURROUND RECEIVER ADV-M71
ADV-M71
ON / STANDBY
Cassette deck
(DRR-M31)
(sold separately)
NOTES:
• Do not plug the power cord into the power outlet until all connections are
completed. Be sure to interconnect the channels (L to L (white) and R to
R (red)) properly, as shown on the diagram.
• Use the AC OUTLET for audio equipment only. Do not use them for hair
driers, etc.
• Insert the plugs securely. Incomplete connections may result in noise.
• Be sure to connect the speaker cords between the speaker terminals and
the speaker systems with the same polarities ( + to +, – to – ). If the
polarities are switched, the sound at the center will be weak, the position
of the different instruments will be unclear, and the stereo effect will be
lost.
• After unplugging the power cord, wait about 5 seconds before plugging it
back in.
• Note that setting the connection cords (pin-plug cords) next to the power
cords may result in humming or other noise.
18Tr02m 46s
1
L
dB
-60
-40
-30
-20
-12
-6
-2
0
R
SURROUND / SELECT
PUSH - PARAM.
-
+
BAND
MENU/ SET
TONE / SDB
VOLUME
FUNCTION
PHONES
(Horizontal installation)
Install the sets as shown in one
of these diagrams. In either
case, be sure that the DVD
surround receiver's ventilation
holes are not obstructed.
B
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU/ SET
ADV-M71
TONE / SDB
VOLUME
FUNCTION
ON / STANDBY
PHONES
DMD-M31
18Tr02m 46s
L
1
dB
-60
-40
-30
-20
-12
-6
-2
0
R
DRR-M31
(Vertical installation)
DMD-M31
DRR-M31
ENGLISH
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents