Denon ADV-M71 Operating Instructions Manual page 58

ENGLISH
(3) Playback using the Dolby Headphone mode
• The ADV-M71 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake Technology for
achieving 3D sound over regular headphones.
• The Dolby Headphone mode is set when headphones are connected to the ADV-M71's headphones jack.
• There are actually four Dolby Headphone modes creating different sound field effects: DH1, DH2, DH3 and Bypass (normal stereo playback).
• The Dolby Headphone mode is compatible with Dolby Digital and DTS multi-channel sources. With 2-channel sources, playback in the Cinema,
Music 1 and Music 2 modes can be selected with the 2-channel mode setting.
B
DVD SURROUND RECEIVER ADV-M71
ON / STANDBY
1 Connect headphones (sold separately) to the headphones
jack.
• When headphones are plugged in, the output to the
speakers is automatically turned off and no sound is
produced from the speakers.
PHONES
2 Press the surround parameter button and display the
surround parameters.
When the function is set to DVD, this is also shown on the
display.
SURROUND / SELECT
PUSH - PARAM.
Main unit
58
2,3
SURROUND / SELECT
PUSH - PARAM.
- +
BAND
MENU / SET
TONE / SDB
VOLUME
FUNCTION
PHONES
1
TEST TONE INPUT MODE SURROUND FUNCTION
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
1 2
+
DVD
8 9
-
6 7
STATUS
3 MUTING
SETUP TONE /SDB
3
ENTER
SURROUND
CH SELECT PARAMETER
2
- +
VCR CH
RETURN DISPLAY MENU TOP MENU
ANGLE AUDIO SUB TITLE
RC-966
SURROUND
PARAMETER
Remote control unit
3 Set the various surround parameters.
If nothing is done for 6 seconds from when the parameter
is displayed, the normal display reappears.
SURROUND / SELECT
PUSH - PARAM.
Main unit
• Dolby H mode setting
H
DH1 DH2
,
• 2-channel mode setting
2 C I N E M A
• The mode switches as shown below each time a button is
operated.
CINEMA
MUSIC2
Can be selected when there is no signal or when playing a
2-channel source.
There are also the same parameters as those described under
"(2) Playing in the Dolby Virtual Speaker mode", namely:
D.COMP. setting
B
LFE level setting
B
DEFAULT setting
B
When the surround parameters are displayed, use the • and ª
cursor buttons on the remote control unit to switch to previous or
following items.
Remote control unit
D H 1
DH3 BYPASS
/
MUSIC1