Assembly - Weslo Aerobicstride 2.0 Treadmill User Manual

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own rubber mallet
Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag,
check to see if it has been preattached to one of the parts to be assembled. To avoid damaging plastic
parts, do not use power tools for assembly.
M10 Washer
(14)–10
M12 Washer
(12)–2
1. Attach the Base Crossbar (44) to the two
Upright Bases (16) with two M10 x 50mm
Screws (15) and two 10mm Washers (14) as
shown.
M6 x 15mm
Screw (4)–2
M10 Nut (18)–10
1
4
.
M10 x 50mm Screw (15)–2
M10 x 55mm Screw (13)–4
M12 x 60mm Screw (11)–2
16
15
14
44
16
14
15