Summary of Contents for Weslo Cadence A60 Treadmill
Page 1
Model No. WATL14906.0 USER'S MANUAL Serial No. Serial Number Decal QUESTIONS? If you have questions, or if any parts are missing or damaged, PLEASE CONTACT OUR CUS- TOMER SERVICE DEPARTMENT DIRECTLY. Call toll-free: 800-830-7240 E-mail: service@goodfamily.cc Goodfamily’s Web site: www.goodfamily.cc ICON’s Web site: www.iconfitness.com CAUTION...
ORDERING REPLACEMENT PARTS ..........Back Cover Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the center of this manual. WESLO is a registered trademark of ICON IP, Inc.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 11. If an extension cord is needed, use only a 3- that all users of this treadmill are adequately conductor, 1mm (14-gauge) cord that is no...
Page 4
21. Do not change the incline of the treadmill by tenance and adjustment procedures de- placing objects under the treadmill. scribed in this manual. Never remove the motor hood unless instructed to do so by an 22. Inspect and properly tighten all parts of the authorized service representative.
® CADENCE ing this manual, please see the front cover of this man- A60 treadmill. The CADENCE A60 treadmill combines ual. To help us assist you, please note the product advanced technology with innovative design to make model number and serial number before contacting us.
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
Page 7
3. With the help of a second person, raise the Uprights (53, 54) so the Base (52) is flat on the floor as shown. Hole Next, position the front of the treadmill Frame (51) between the Uprights. See the inset drawing. Locate the wire inside the lower end of the Right Upright (54).
Page 8
5. Place the Left Handrail (56) on the Console Assembly (91). Attach the end of the console ground wire to the in- dicated small hole in the Left Handrail with the Silver Ground Screw (8). Then, attach the Left Handrail (56) to the Console Assembly (91) with two Console Screws (4), a Crossbar Console Ground Wire Small...
Page 9
8. Set the Console Assembly (91) on the Right Upright (54) and the Left Upright (not shown). Next, finger tighten four Handrail Bolts (3) with four Handrail Washers (13) and four Handrail Star Washers (10) (only two of each are Slot shown) into the Right Upright and the Left Upright.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed.
Page 11
CONSOLE DIAGRAM Note: If there are sheets of clear plastic Clip on the console, remove the plastic. FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The treadmill console offers a selection of features Plug in the power cord (see designed to make your workouts more effective.
Page 12
Follow your progress with the track and the HOW TO USE THE MANUAL MODE displays. The track—The track Insert the key into the console. represents a distance of 400 meters (1/4 mile). See HOW TO TURN ON THE POWER on page As you walk or run on the treadmill, the indica- tors around the track will...
Page 13
Note: The console can To measure your heart rate, stand on the foot display speed and dis- rails and hold the metal contacts—avoid moving your hands. When your pulse is detected, the tance in either kilome- ters or miles. To see small heart symbol in the lower right display will which unit of measure- flash, one or two dashes will appear, and then...
Page 14
one of the displays to alert you, and then the HOW TO USE A SPEED PROGRAM speed of the walking belt will change. The pro- gram will continue until all 30 periods are com- Insert the key into the console. pleted.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. Frame 1. Hold the metal frame firmly in the location shown by the arrow at the right.
Page 16
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Lower the frame until it is past the latch pin. Then, release the latch knob.
MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Page 18
PROBLEM: The walking belt slows when walked on SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm (14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- 5–7cm come damaged.
CONDITIONING GUIDELINES is to burn fat, adjust the speed and incline of the tread- WARNING: mill until your heart rate is near the lowest number in Before beginning this your training zone. or any exercise program, consult your physi- cian. This is especially important for individu- For maximum fat burning, adjust the speed and incline als over the age of 35 or individuals with pre- of the treadmill until your heart rate is near the middle...
Page 20
Handrail Washer (11)–2 4” Bolt (120)–2 PART IDENTIFICATION CHART Remove this chart and use it to identify small parts during assembly. Save this chart and the EXPLODED DRAWING/PART LIST for future reference. Console Silver Ground Crossbar Latch/Console Crossbar Star Screw (4)–4 Screw (5)–2 Screw (8)–1 Back Screw...
Page 21
PART LIST—Model No. WATL14906.0 R1006A No. Qty. Description No. Qty. Description No. Qty. Description Frame Pivot Bolt Electronics Star Grommet Upright Bolt Washer Stop Bracket Handrail Bolt Incline Leg Wheel Controller Console Screw Motor Tension Nut Transformer Crossbar Screw Frame Pivot Nut Filter Wheel Housing Bolt Power Cord...
When ordering parts, please be prepared to provide the following information: • the MODEL NUMBER of the product (WATL14906.0) • the NAME of the product (WESLO CADENCE A60 treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) •...