Connecting The Pc Signal To The Monitor; Hdmi Connection; Dvi Connection; Vga Connection - Bosch UML-262-90 User Manual

32 en | Installing the Monitor
5.6

Connecting the PC Signal to the Monitor

There are three ways to connect the PC signal to the monitor:
HDMI, DVI, and VGA.
5.6.1

HDMI Connection

Connect an HDMI cable (user-supplied) to the HDMI input on
the bottom panel of the monitor.
Figure 5.6 HDMI Input
5.6.2

DVI Connection

Connect a DVI-D cable (supplied) to one of the DVI-D inputs on
the bottom panel of the monitor.
Figure 5.7 DVI Input
5.6.3

VGA Connection

You can connect a PC signal to the monitor using the VGA
connector on the rear panel and a VGA cable (D-SUB to D-SUB).
Figure 5.8 VGA Input
Pin Description
1 Red Video
2 Green Video
3 Blue Video
4 Ground
5 Ground
F.01U.172.600 | 1.0 | 2010.10
Pin Description
6 Red Ground
7 Green Ground
8 Blue Ground
9 N/A
10 Signal Cable Detect
User's Manual
Full HD LCD Monitors
Pin Description
11 Ground
12 SDA (for DDC)
13 H-Sync or H+V Sync
14 V-Sync
15 SCL (for DDC)
Bosch Security Systems, Inc.