Bosch UML-262-90 User Manual page 47

Full HD LCD Monitors
Auto Switch
Display Wall
Image Retention
Firmware Version Displays the release level of the monitor firmware.
NOTICE!
When Key Lock is enabled through the control panel, use the
control panel buttons to disable the key lock command. To
disable the Key Lock feature using the control panel buttons,
press and hold both the Input and the Menu buttons until the
monitor displays the Key Unlocked message.
Bosch Security Systems, Inc.
Enables or disables the auto switch function that allows the monitor
to automatically switch to and display an available input signal.
If multiple UML-422-90 monitors are tiled to form a display wall, use
this function to configure the display wall settings:
X. Index: Selects the horizontal position of the monitor in the display
wall matrix.
Matrix: Selects the matrix configuration of the display wall.
Y. Index: Selects the vertical position of the monitor in the display
wall matrix.
If turned on, the LCD monitor automatically displays swift moving
patterns to prevent the formation of image retention on the screen.
User's Manual
Navigating the Monitor | en
F.01U.172.600 | 1.0 | 2010.10
47