Trip Button - Fiat 500 Abarth Owner's Manual

156 UNDERSTANDING YOUR INSTRUMENT PANEL

Trip Button

The TRIP button, located on the right steering column
stalk, can be used to display and to reset the previously
described values.
• A short button press displays the different values.
• A long button press resets the system and then starts a
new trip.
New Trip
To reset:
• Press and hold the TRIP button to reset the system
manually.
• When the "Trip distance" reaches 9999.9 miles or kilome-
ters or when the "Travel time" reaches 99.59 (99 hours and
59 minutes), the system is reset automatically.
• Disconnecting/Reconnecting the battery resets the
system.
NOTE: If the reset operation occurs in the presence of
the screens concerning Trip A or Trip B, only the infor-
mation associated with Trip A or Trip B functions will be
reset.
Start Of Trip Procedure
With the ignition on, press and hold the TRIP button for
over one second to reset.
Exit Trip
To exit the Trip function, wait until all the values have
been displayed or hold the SET ESC button for longer
than one second.
Briefly press the SET ESC button to go back to the menu
screen or press and hold the SET ESC (approximately
one second) to go back to the main screen without storing
settings.