Fiat 500 Abarth Owner's Manual page 169

Hill Start Assist
This function is used when starting a vehicle from a stop
on a hill. Hill Start Assist maintains the same level of
brake pressure the driver applied for a short period of
time after the foot has been removed from the brake
pedal.
Proceed as follows to switch this function on or off:
1. Briefly press the SET ESC button. "On" or "Off" will
flash on the display (according to previous setting).
2. Press the UP or DOWN
3. Briefly press the SET ESC button to go back to the
menu screen, or press and hold the button (approxi-
mately one second) to go back to the main screen
without storing the settings.
GSI Shift Up
With this function active, the boost gauge will display a
shift up message and up arrow at the appropriate time of
shift.
To change the setting proceed as follows:
1. Briefly press the SET ESC button "Normal/Sport" or
2. Press the UP
button for setting.
3. Briefly press the SET ESC button to go back to the
Daytime Running Lamps (DRL)
This function may be used to activate / deactivate the
Daytime Running Lamps.
UNDERSTANDING YOUR INSTRUMENT PANEL 167
"Sport" will flash on the display (according to the
previous setting).
or DOWN
menu screen, or press and hold the SET ESC button
(approximately one second) to go back to the main
screen without storing the settings.
4
button for setting.