Fiat 500 Abarth Owner's Manual page 161

2. Briefly press the SET ESC button to go back to the
menu screen or press and hold the SET ESC (approxi-
mately one second) to go back to the main screen
without storing settings.
Speed Beep (Speed Limit)
With this function it is possible to set the car speed limit
(mph or km/h); when this limit is exceeded the driver is
immediately alerted.
To set the speed limit, proceed as follows:
1. Briefly press the SET ESC button. The display will
show the message (Speed Beep).
2. Press the UP or DOWN
limit activation (On) or deactivation (Off).
3. When the function is activated (On), briefly press the
NOTE: Selection is possible between 20 and 125 mph
or km/h, depending on the selected unit. The setting will
increase/decrease by five units each time the UP/DOWN
button is pressed. Press and hold the UP/DOWN button
to increase/decrease the setting rapidly. Save the setting
by briefly pressing the button when you approach the
required setting.
• Briefly press the SET ESC button to go back to the
button to select speed
UNDERSTANDING YOUR INSTRUMENT PANEL 159
SET ESC button to display the presently set activation
speed. Pressing the UP
selects the speed limit. Press SET ESC to confirm
selection.
menu screen, or press and hold the SET ESC button
(approximately one second) to go back to the main
screen without storing the settings.
or DOWN buttons
4