Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light - Fiat 500 Abarth Owner's Manual

WARNING!
When in "Partial Off" mode, the TCS functionality of
ESC (except for the limited slip feature described in
the TCS section) has been disabled and the "ESC Off
Indicator Light" will be illuminated. When in "Par-
tial Off" mode, the engine power reduction of TCS is
disabled, and the enhanced vehicle stability offered
by the ECS system is reduced.
Full Off
This mode is intended for off-highway or off-road use
only and should not be used on public roadways. In this
mode, all TCS and ESC stability features are turned OFF.
To enter the "Full Off" mode, depress and hold the ESC
OFF switch for five seconds. After five seconds, the ESC
OFF Indicator Light will illuminate, and the "ESC OFF"
message will display in the EVIC. To turn ESC ON again,
momentarily press the ESC OFF switch.
WARNING!
In the ESC "Full Off" mode, the engine torque
reduction and stability features are cancelled. There-
fore, the enhanced vehicle stability offered by ESC is
unavailable. The "Full Off" ESC mode is intended
for off-highway or offroad use only.
ESC Activation/Malfunction Indicator Light And
ESC OFF Indicator Light
The ESC Activation/Malfunction Indicator
Light in the instrument cluster will come on
when the ignition switch is turned to the MAR
(ACC/ON/RUN) position for four seconds. If
the ESC Activation/Malfunction Indicator Light comes
on continuously with the engine running, a malfunction
has been detected in the ESC system. If this light remains
on after several ignition cycles, and the vehicle has been
STARTING AND OPERATING 235
5