Trip Functions; Values Displayed - Fiat 500 Abarth Owner's Manual

Trip Functions

Both trip functions are resettable (reset — start of new
trip).
"Trip A" can be used to display the figures relating to:
• Trip distance A
• Average consumption
• Instant consumption A
• Average speed A
• Travel time A (driving time).
"Trip B" can be used to display the figures relating to:
• Trip distance B
• Average consumption B
• Average speed B
• Travel time B (driving time).
UNDERSTANDING YOUR INSTRUMENT PANEL 157
NOTE: "Trip B" functions may be excluded (see "Trip B
Data"). "Range" and "Instantaneous consumption" can-
not be reset.

Values Displayed

Range
This indicates the distance which may be travelled with
the fuel remaining in the tank, assuming that driving
conditions will not change. The message "----" will
appear on the display in the following cases:
• Distance less than 30 miles (or 50 km).
• The vehicle is parked for a long time with the engine
running.
NOTE: The range depends on several factors: driving
style, type of route (freeway, residential, mountain roads,
etc.), conditions of use of the car (load, tire pressure, etc.).
Trip planning must take into account the above notes.
4