Xerox Phaser 3610 User Manual page 119

Symptom
The top margin is incorrect.
The printed surface of the paper is
bumpy.
The printed areas contain white
spots.
Toner streaks appear on the edges of
prints.
Solutions
• Ensure that the paper is loaded properly.
• Ensure that the margins are set correctly in the application you are using.
1. Print a solid image over the entire surface of one sheet of paper.
2. Load the printed sheet into the tray with the printed side face down.
3. Print five blank pages to remove debris from the fuser rollers.
Adjust Transfer Unit to a lower value for the selected paper type. For details,
see Adjusting the Transfer Unit
Enable the Decrease Electrostatic Memory feature. For details, see
Decreasing Electrostatic Memory
Xerox
on page 91.
on page 98.
® ®
Phaser 3610 Black and White Printer
Troubleshooting
119
User Guide